Storage & Buffer System
Storage & Buffer System
MCS is a temporary storage buffer in the cleanroom designed to absorb timing discrepancies between the completion of processing at one piece of manufacturing equipment and the start of processing at the next.
• High reliability and cycle time improvement
• Improved maintainability
• Compatible with dual cranes
• Accommodates complex port configurations via conveyors
• Inter-floor transport
• High-speed vertical hoisting
• Quick installation
• Accommodates complex port configurations via conveyors
A space-saving temporary buffer or storage location utilized to enhance the productivity of an OHT system. OHB locations can be installed under or on either side of the OHT track to reduce transportation wait times, improve traffic flow and space utilization.
This buffer unit is designed to be installed over the load port of manufacturing equipment.
Tool Station can be installed on any equipment compliant with SEMI Standard E15.1, regardless of whether it is a new or existing line.
By buffering carriers (FOUPs) closest to the process equipment and providing each piece of equipment with an independent transfer unit, Tool Station reduces "FOUP replacement time"—from removing a processed FOUP to supplying the next one—aiming to improve the utilization rate of inspection tools with short inspection times.
• Temporary storage in a buffer of up to 4 bays × 3 tiers (max.)
• N2 purge compatible (optional)
• Easy removal and reinstallation during maintenance, each taking 10 minutes or less
| Cycle Time | 15 sec. |
|---|---|
| Capacity | 4 to 12 FOUPs |
| Standard Installation and Adjustment Time | 360 min. |
| Equipment Modification | Minimal (depends on equipment configuration) |
As process miniaturization increases the need for countermeasures against oxidation, moisture, and ambient atmospheric effects between process steps, N2 purging offers an easy retrofit solution for stocker and buffer systems. N2 purging eases time limitations between process steps and prevents yield reduction.
• Flow rate control via recipe instructions (Remote configuration available)
• Proven track record of compatibility with multiple FOUP manufacturers
• Maintains quality with pre-purge function
• Highly efficient purging achieved with in-house manufactured nozzles (Purge efficiency: 90% or higher)
CDWX is a system that extracts wafers from FOUPs and stores them at high density in dedicated cases (cells). Wafers are loaded one by one onto dedicated rings by a handling robot, and 25 rings are stored as a single cell on a rack. By optimizing the ring shape, the wafer pitch inside the cell during storage is reduced to approx. 3.7 mm, enabling higher-density storage compared to standard wafer transport containers known as FOUPs (wafer pitch = 10 mm).
When loading or unloading wafers onto or from the rings, the vertical pitch between rings in the cell is expanded. Once the loading/unloading operation is complete, the pitch is restored, achieving both smooth handling by the robot and space savings during storage.
Wafer pitch reduced by approximately 60% compared to FOUP
Ideal wafer storage environment (clean/purge) achieved within a minimal amount of space
Wafer cells can be retrieved from the exchange port during equipment operation
Retrieved wafer cells can be placed in a dedicated jig and cleaned using FOUP cleaners
| Floor Area | Approx. 9.8 m² |
|---|---|
| Storage Capacity | 1,725 to 4,325 wafers (up to max. 20,825 wafers) |
| Equipment Dimensions | W: 3,038 mm (up to max. 10,200 mm) D: 3,226 mm H: 3,150 mm (min.) to 4,490 mm (max.) *Including FFU |