README.TXT
===========================================================================
                                     Windows

                                  Print Control
                                  Version 3.5.6

===========================================================================

=====================================
1. Operating environment
=====================================

Computers
        Computers on which WindowsVista/XP/2000/Server 2008/Server 2003 
        English version works

Compatible printers
        Muratec MFX-C3400


======================================
2. How to use
======================================
2.1 How to start the utility
------------------------------------
(1) Execute [Print Control] in [Start]-[Program]-[Muratec]-[Print Control].

2.2 How to retrieve logs
------------------------------------
(1) Execute Add a Printer in Printer menu. Following the procedure, add a 
    printer from which you want to retrieve logs.
(2) Job Account ID registration dialog appears. If necessary, add a Job 
    Account ID.
(3) A dialog appears and asks if you want to start retrieving logs. Click 
    "Yes."

2.3 How to end log retrieving
------------------------------------
(1) Execute Start/End Log in Printer menu. If you do not want to retrieve 
    logs from a printer any longer, execute Delete a Printer/Printer Group 
    in Printer menu and delete the printer.

2.4 How to uninstall the utility
------------------------------------
(1) Refer to "2.3. How to end log retrieving" and delete all the printers 
    that have been registered.
(2) Execute [Delete Print Control] in [Start]-[Program]-[Muratec]-
    [Print Control].


======================================
3. Notes
======================================
(1) When you use a PS printer driver for printing, information of user 
    name, Job Account ID or document name sometimes is not kept in log 
    depending on your application. In such a case, the job is handled as a 
    job of an unregistered user (Job Account ID = 0, User name = blank).

(2) When you use a PS printer driver for Duplex print, a blank page on the 
    backside is not counted as a page. 

(3) When you use Macintosh PS printer driver for printing, document name 
    is not kept in the log.

(4) When you use Macintosh PS printer driver for printing color data in 
    gray scale, it may be counted as a color page.

(5) Printing through PRINT SETTING in NETWORK MENU of printer's operator 
    panel or printing through DIP switch in Ethernet board is not recorded 
    as local print (Job Account ID= 1879048192) in the log. Such case is 
    handled as a job of an unregistered user (Job Account ID = 0, User 
    name = blank).

(6) The drive to which you specified a folder for log storage at 
    installation needs approx. 3MB hard disk space for 10,000 logs.

(7) If in the Firewall setting on WindowsXP SP2, [Don't allow exceptions] 
    is checked, printer discovery function does not work for the segments 
    beyond the router. Printers connected within the same segment will not 
    have this problem. Even when the printer cannot be discovered, if you 
    select [Specify the printer by address] in Add printer wizard to get 
    logs and select [TCP/IP Network] in [Address], and enter IP address 
    directly, you can set it. 

(8) Logs cannot be acquired if you update to Windows XP SP2 when log 
    acquisition has already begun, in the condition that the printer had 
    been added to the Print Control under Windows XP SP1 or earlier. 
    When this occurs, please restart the Windows. 


========================
4. Version up history
========================

    Ver.3.5.6   10/16/09
        1st version


* Trademarks

Company names and product names referred to in this document are 
registered trademarks or trademarks of individual companies.


End
